Product Detail



Show Larger Photo


Part #IWDMIG25-140

Specifications:
  • Rated Input: 115 VAC, 60 Hz, 20 Amps
  • Maximum output open-circuit voltage: 28 VDC
  • Rated Output: 90 Amps @ 18 V, 20% Duty Cycle
  • Wire feed speed: 59 - 393 inches per minute
  • Wire Size:
    • Solid steel: .023" - .030"
    • Flux cored: .030" - .035"
  • Wire Spool Size: 8" x 2", 4" x 5/8"
  • Weight: 45 lbs
  • Dimensions (L x W x H): 16" x 9.6" x 14.5"
Manufacturer: Weldmark-Iwdc
MIG25-140 MIG WELDER
140 Amp Wire Feeder / Welding Package

Price: $419.00 Each
Description:

The Weldmark MIG25-140 is capable of running the following wires: .023" - .035" mild steel or stainless steel, .030" -.035" flux-cored, and .030" aluminum. Infinite voltage settings and wire feed speeds make the Weldmark MIG25-140 easy to set and adjust for different materials and thicknesses.

Special Features:

  • Infinite voltage controls from 25 to 140 amps
  • Convenient polarity changeover allowing quick and easy changes of polarity between solid or tubular wire
  • Ergonomic control panel to increase visibility for easier adjustments
  • Overload protection switch to protect the machine from exceeding the maximum load
  • Spool gun ready (not included)
  • 1 year internal warranty

Includes:
Tweco style MIG gun with 10' cable, Work (Ground) clamp with 9' cable, Built-in gas solenoid valve with dual gauge regulator flowgauge with gas hose, 2lb (4") spool .023" solid 70S-6 MIG wire, Contact tips .030" & .035" (pre-installed .023" contact tip)


Prop 65 Warning

warning

Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

View By Supplier
Popular Brands