Product Detail



Show Larger Photo


Part #MLR951649

Specifications:
  • Input Power:
    120 V, 20 A, 50/60 Hz, single-phase
    230 V, 17.5 A, 50/60 Hz, single-phase
  • Welding Amperage Range:
    MIG/Flux Cored: 30 - 200 Amps
    TIG: 5 - 150 Amps
    Stick: 20 - 150 Amps
  • Rated Output:
    CV: MIG/Flux Cored -
    120/230 VAC -- 110 A at 19.5 V, 20% Duty Cycle
    120/230 VAC -- 150 A at 21.5 V, 20% Duty Cycle
    CC: TIG -
    120 VAC -- 150 A at 16 V, 30% Duty Cycle
    230 VAC -- 150 A at 16 V, 30% Duty Cycle
    CC: Stick -
    120 VAC -- 100 A at 24 V, 35% Duty Cycle
    230 VAC -- 150 A at 26 V, 30% Duty Cycle
    • Max. Open-Circuit Voltage: 90 VDC
    • Wire Feed Speed: 70 - 425 IPM
    • Wire Diameter Capacity:
      .023 - .035" Solid Steel
      .023 - .035" Stainless
      .030 - .045" Flux Cored
      .030 - .035" Aluminum
    • Dimensions: 14-1/2" H x 9-3/4" W x 17" D
    • Weight: 29 lb
Manufacturer: Miller Electric
MULTIMATIC 200 w/WP17 TIG KIT
Multi-Process Power Source

The only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds (13.2 kg) and running on either 120 or 230 V, the Multimatic 200 can go anywhere.

Price: $2,379.00 Each
Spec Sheet
Description:

The only all-in-one, portable, multiprocess power source from Miller is Miller's most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere.

Special Features:

  • Auto-Set Elite - Auto-set Elite can be used on multiple materials, and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
  • Impact-resistant Case - provides strength and durability, protecting the internal components and welding wire
  • Excellent Arc Characteristics - Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2
  • Multi-Voltage Plug (MVP) - allows you to connect to common 120 or 230 volt power receptacles without the use of any tools - choose the plug that fits the receptacle and connect it to the power cord
  • Simple Aluminum Solution - use the optional Spoolmate 100 direct-connect spool gun to get a reliable and economical solution for welding aluminum up to 1/4" with 4043 aluminum wire
  • Fan-ON-Demand - Miller's Fan-On-Demand technology operate only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine
  • TIG Contractor Kit - The TIG Contractor Kit give you everything you need for remote TIG welding with the Multimatic 200. Kit Includes: Weldcraft A-150 TIG torch with Dinse adapter, RFCS-6M foot control, regulator, gas hose, AK2C torch accessory kit, and a protective carrying case

Includes:Power Source, TIG Contractor Kit (MLR301130), power cord and MVP plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A), 10 ft. Bernard Q150 MIG gun, 13 ft. cable with electrode holder and 25-mm Dinse connector, 10 ft. work cable with clamp and 25-mm Dinse connector, Miller/Smith Argon and AR/CO2 mix flow gauge regulator with gas hose, Quick Select drive rolls for .024" or .030/.035" solid wire and .030/.035" flux-cored wire, two contact tips for .030" wire and two contact tips for .035" wire, information/setting chart and quick setup guide, and material thickness gauge.

 

 


View By Supplier
Popular Brands