The Fabricator 181 is a single phase 230 VAC input wire welder with Constant Voltage (CV) output characteristics designed for MIG (GMAW) and Flux Cored (FCAW) welding applications. With an output range of 40 to 180 Amps, the Fabricator 181 allows you to weld materials down to 26 gauge and materials up to 1/4.
A quick disconnect fitting gun allowing the operator to set up out-of-the-box very easily and quickly and is a timesaving and convenient feature when removing the torch to clean or when replacing the liner. Other features include a feeder drive system which has a rugged non-conductive feedhead, a low noise constant speed drive motor, an easily adjustable idle roll pressure arm and one feedroll which runs mild steel and stainless steel wire
This unit comes set up for .030 diameter solid wire and the feed roll also contains a groove for .023/.035 wire. Optional kits are also available to convert the gun and feed system to use .030, .035 and .045 flux cored and self-shielding wire (mild steel and stainless steel) and .035 aluminum wire
It comes equipped with: a built-in wire feeder and wire spool hub; a 2 lb. spool of .030 solid wire; quick connect Tweco welding gun and cable; work cable and clamp; input power cord; regulator and flowgauge; spare contact tips and nozzles
The Tweco FABGUN® 250 MIG Gun fitted to the Fabricator 181 offers robust construction, unparalleled reliability and easy replacement of consumable parts. It also has an operating capacity in excess of the capacity of the Fabricator 181 and is available in 12 ft. lengths and connects to the power source by a quick-disconnect fitting
Additional Parts and Accessories for this product: